Announcement

Collapse
No announcement yet.

Hardware monitor problem, pls give me a help!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Hardware monitor problem, pls give me a help!

    My computer had a problem, which it said something like this hardware monitor detected error.

    When I entry into the BIOS screen and check "Hardware monitor", the voltage of VCORE over limit 1.95, what means of this?

    After this I exit the BIOS, and it stopped, no more reaction.

    Do anyone can help me slove it? or just buy a new autotransformer?

    Thanks a lot
    Good to see you!

  • #2
    might have something to do with your power supply as well you might check that it could be goin out
    A MASTER CHIEF SHALL NOT DRINK, BUT IF HE SHOULD DRINK HE SHALL NOT STAGGER IF HE SHOULD STAGGER HE SHALL NOT FALL IF HE SHOULD FALL HE WILL FALL IN SUCH A WAY THAT HIS RANK IS COVERED UP SO PEOPLE WILL THINK HE IS AN OFFICER!!!!..(MC Billy Sunday "men of honor")

    Comment


    • #3
      Have you been overclocking? Usually the vcore setting doesn't set itself...look at your manual for that motherboard..there should be a jumper on the board that will load your bios w/ the default settings..

      Comment


      • #4
        oppss... I dont know, sometimes, it change itself back to 1.7, and sometime if problem happen, it change to 1.95.

        But, sure, thx for u 2 suggestion.

        Now, I cant use PC at home, thats very inconvenience.. -_-"
        Good to see you!

        Comment

        Working...
        X