If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
well first
on the bios upgrade do they use a windows utility program to flash update the bios
if they just supply the bios .bin file then you need to make a bootup disk via floppy put the flasher progam and bios bin file on the disc
set your first boot device to floppy save and exit
then when the boot up disc is done loading type the flash program name such as for award flash its awdflash etc
then follow the screen instructions
i dont suggest doing this yourself if you dont trust yourself
cuz if you screw up
you render your motherboard a brick then
Comment