Enermax Thormax GT Full Tower Case Swallows E-ATX Motherboards

[[Coi] Mr.CLuBBeR]

Giant sized armor for big and burly system builds

Planning a massive system build loaded to the gills with large components and high end parts? You'll need a case that's capable of housing all those parts, and if you're in the market for one, Enermax hopes you'll check out its new Thormax GT full tower enclosure. The Thormax GT is large and in charge with support for E-ATX motherboards, graphics cards up to 490mm in length, and 240mm and 360mm depth liquid coolers.
You can fit up to four dual-slot graphics cards inside the Thormax GT, two of which can be up to 490mm in length as previously mentioned; the other two must be 360mm or less and requires removing the HDD cage. The case also houses various drive spaces -- four 5.25-inch bays with screwless latch designs, five 2.5-inch/3.5-inch HDD trays, and an additional 2.5-inch drive behind the motherboard tray.
Enermax says the design of the Thromax GT allows the installation of two extended length liquid coolers with 60mm high clearance. You can install a 360mm liquid cooler under the roof and a 240mm at the bottom. It also comes pre-installed with dual 18cm Enermax Vegas blue LED fans with an additional six 12/14cm fan slots for more airflow.
The top I/O panel is one of the more robust out there. It has two USB 3.0 ports, four USB 2.0 ports, 4-level fan RPM controller with LED speed indicators, headphone and microphone ports, and of course power and reset buttons.
Other features include 360-degree rotatable feet, a sturdy handle for carrying the case, and a foldable and movable magnetic headset holder.
No word yet on how much the Thormax GT costs or when it will be available.
Follow Paul on Google+, Twitter, and Facebook


More...